TENS 7000 2nd Ed TENS Unit w/ 5 Modes and Timer

TENS 7000 2nd Edition

The TENS 7000 is a very nice and our most Powerful (100mA) TENS unit. It is also one of our most popular TENS unit. The TENS 7000 2nd edition's features include Dual Channel, 5 modes, Timer, Patient Compliance Meter, New Stronger 100mA output, safety amplitude cover, sturdy metal belt clip, rubber side railings for maximum handling and a premium silver finish.

TENS Unit are primarily used for managing chronic pain. Works by blocking the pain signal, and by increasing endorphins in the body. Can be worn all day or on an as needed basis. Device features include adjustable pulse rate, pulse width, and amplitude (intensity). Placement of electrodes are usually at pain site or along the nerve channels, called dermatomes.

Detailed Description:

Channels: Dual Channel, isolated between channels

Pulse Amplitude: Adjustable, 0-100 mA peak into 500 ohm load each channel.

Voltage: 0 - 50V (Load: 500 ohm)

Pulse Rate: Adjustable, from 2 to 150 Hz, 1 Hz/step

Pulse Width: Adjustable, from 50 to 300 microseconds, 10uS/step

Wave Form: Asymmetrical Bi-Phasic Square Pulse

5 Modes: B(Burst), N(Normal), M(Modulation), SD1(Strength Duration), SD2

Burst Mode: Burst rate: Adjustable, 0-5 to 5 Hz; Pulse width adjustable, 50~300uS; Frequency fixed = 100 Hz

Normal Mode: The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value.

Modulation mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300 Microseconds) are fully adjustable.

The SD1(Strength-Duration) mode consists of automatic modulation intensity and pulse width in 40% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 40% while the pulse width is increased by 40% in 5 seconds. In the next 5 seconds, the intensity is increased by 40% while the pulse width is decreased by 40%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300�S) are fully adjustable.

The SD2(Strength-Duration) mode consists of automatic modulation intensity and pulse width in 70% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 70% while the pulse width is increased by 70% in 5 seconds. In the next 5 seconds, the intensity is increased by 70% while the pulse width is decreased by 70%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300 Microseconds) are fully adjustable.

Patient Compliance Meter: This unit can store 60 sets of operation records. Total recorded time is 999 hours.

Timer: Adjustable, from 5 to 60 minutes or Continuous. Adjustable in 5 minutes each step. Treatment time countdown automatically.

3 Year Manufacturer Warranty

System Includes: Stimulator, Lead Wires, 1 package of high quality Self-Adhesive Electrodes, 9V Battery, Hard Plastic Carrying Case, Instruction Booklet.