Ultra-IF, Digital Interferential Unit

Ultra-IF, Digital Interferential

The Ultra IF is a Digital Interferential unit that offers true sine wave technology, which is considered true interferential. Interferential is used for very localized areas where deep current for pain control or increased circulation is needed.

Description:

Dual Channel, isolated between channels

Pulse intensity: Adjustable 0-70mA peak into 500 ohm load each channel, constant current

Carrier Frequency: 4000Hz Fixed (CH1)

Modulating Frequency: 4004-4160Hz Adjustable (CH2)

Modes: Constant Mode: 4-160bps, Adjustable; Auto Sweep: 80-145 bps, 4-45 bps, 4-Set bps; Frequency Shift: 1/1 abruptly shift, 6/6 abruptly shift, 6/6 ramped, 10/10 abruptly shift, 10/10 ramped

Sweep Time: 15 seconds

Frequency Shift Percentage: Frequency shifts from 30% below set frequency to 60% above and return to 30% below set.

Interference Pulse Freq: 4-160 bps, Adjustable 4/bps/step

Pulse Duration 125us maximum

Wave Form: Symmetrical balanced Sine save

Patient Compliance Meter: Shows the treatment times

Patient Lock: Prevents the patient form changing any of the set parameters by the physician/therapist

Power Source: 9 Volt DC Adapter, 500MA or Alkaline 9V battery(9V battery not recommend for its short life)

1 Year Manufacturer Warranty System Includes: Stimulator, Lead Wires, 4 Self-Stick Disposable Electrodes, 9V Battery, Hard Plastic Carrying Case, Instruction Booklet.